When applied to copper pipe or tubing, flaring and swaging are two similar processes used to gradually widen the end of a tube to allow new connections. Learning how to use a flaring tool or a swaging tool can give you more options in projects that involve joining copper pipe and tubing.
Should you anneal copper before flaring?
It is possible to flare Types K, L or M rigid or hard temper tube, though prior to flaring it is usually necessary to anneal the end of the tube to be flared. The copper tube must be cut square using an appropriate tubing cutter.
What is the difference between swaging and flaring?
Tools for flaring apply pressure to expand the end of pipes or tubing to create a funnel or flared shape. Swaging tools allow you to create wider, deeper openings for pipes and tubing. The use of these tools varies depending on the application of the pipes and tubing.
What are two types of flaring tools?
Two types of flaring tools are used to make flares on tubing: the impact type and the rolling type.
What is hammer type flaring tool?
Made of high-grade hardened steel. This tool has a long nose guide that centers tool for smooth 45 degree uniform flare.
Do flare fittings need Teflon tape?
The threads in a flare fitting are NOT tapered and do not need to be sealed. The seal is between the flared end of the pipe/tube and the tapered face of the other side of the fitting. All the threaded collar does is supply force to create a seal between the opposite tapers of the two ends.
What is a double flare tool?
DESIGNED FOR: The double flaring tool kit has been designed to make double or single flares in copper, aluminum, and brass tubing as well as soft steel brake line tubing. SMOOTHER FUNCTION: This chrome-plated alloy steel swivel reduces friction. It also helps in the smooth functioning of flaring bars.
What is the difference between flare and compression fittings?
Fittings: Generally speaking, compression outlets are used for water and compressed air lines, where slight leakage isn’t going to cause too much of a problem. Flared outlets are used for gas and high-pressure lines, where even a little leakage can cause major problems if left unattended.
What is a 37 degree flare?
37° flare fittings perform well in severe applications where vibration, high pressure, and thermal shock exist. The flare fitting sleeve insures tube alignment with the fitting body axis and minimizes mechanical strain on the tube.
ncG1vNJzZmivp6x7or%2FKZp2oql2esaatjZympmeTlrtur86pp56qXaW2sbGMm5xmnpyWv6awjJyfnpubYra1ec6uq2aenJa%2FqrrGZquop5xis7C%2BjJymqaiVp3qxtc%2BeZg%3D%3D